|
|
|
|
|
|
|
|
|
|
|
|
2" - 5 Gallon Female, Spill Container with Drain, Centered, Coated White
|
Valve for use on used oil evacuation systems which use an air operated pump.
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides an audible alarm for either a high or low level warning with 5' Probe.
|
Provides an audible alarm for either a high or low level warning with a 9.5' probe.
|
For use on aboveground storage tanks for the purpose of containing fuel spillage during remote tank filling operations. 15 gallon capacity. 12 gauge steel construction. Lockable lid, and powder coated white for durability. 1" NPT drain with locking ball valve included. Choice of one or two fill ports, 2", 3", 4" or combination. 2" bung for pump. Only 2" and 3" are ULC Listed. Single column base is easily adjustable.
|
|
|
|
|
|
|
|
|
|
|
|
|
FIG 918, 918F Utilizes the Fig. 818 style clock gauge with a built-in high level warning alarm. Contains a battery powered, intrinsically safe, alarm unit that is mounted remote from gauge. Alarm is set for desired level during installation and can be reset at any time for a change in alarm level requirements.
|
w/ 2" Male Quick Disconnect x 4" Female Threads
|
Installed on aboveground storage tanks for the purpose of containing small spills and drips from the fill nozzle. 7� gallon capacity. Lockable with drain valve and vented lid. Connects to 4" male (NPT) riser, and is white powder coated. These are now available with either male or female threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Morrison Fig. 918 Clock Gauge is used for measuring liquid level in aboveground storage tanks. It utilizes the Fig. 818 Clock Gauge with a built-in high level warning alarm. It contains a battery powered, intrinsically safe, alarm unit that is mounted remote from the gauge. Alarm is set for desired level during installation and can be re-set at any time for a change in alarm level requirements. The alarm features a 90 decibel high pitched �Beep� cycle alarm, a test/cancel switch, and is powered by two 9 volt batteries (included). Readout format is on a standard 12 hour clock face. Small hand represents feet and the large hand inches. Gauge can be read up to 20-30 ft. away to within 1/8� (1.97� in Metric Version). Maximum measurement capability is 12 feet (3.66 Meters).The gauge can be rotated 3600 after mounting.
|
For use on aboveground storage tanks. The 922 alerts you when your tank is near full while also allowing your tank to breathe during filling and dispensing operations. This 2" full port pressure/ vacuum vent is
equipped with a high intensity, audible alarm (alarm will register 120+ Db. when measured at a distance of 1 ft. with a fill rate of 90 GPM) which can be set by adjusting the cable length to float height. It is fully mechanical, with no wires or batteries needed. The minimum fill rate is 20 GPM.
|
|
|
|
|
|
|
|
|
|
|
Balcrank Complete Tank Package features a 275-gallon Obround (44" H x 27" W x 60" L) with a single-wall tank, a Classic Hose Reel & Panther� HP 3:1 Pump. (Ships Fully Assembled)
|
The ULC listed Morrison Overfill Prevention Valve is designed for use on low-profile, top-loading storage tanks that require a high level shutoff. The valve terminates the fill when the product reaches the preset level. The valved can be retrofitted on existing tanks and fits into a 2" opening.
|
|